Hood Scoop Template

tyler1 I created my own template. I created a driver side and passenger side template. IIRC there are 10 studs on each scoop ('70 style twin scoops). Starting with "stud #1" I measured (center to center) to stud #2, #3, #4, etc...... I then took those measurements, and with the use of AutoCAD, input the dimensions and voila' my template came to life. Fortunately, the under hood structural openings lined up with my template. I used a center punch in the diagonally opposite corners, drilled those 2 holes from the bottom, laid my template on top, and drillled the remaining holes (sweatin' bullets the entire time). Good luck!:cheers: