Brake Light Switch or Turn Signal Switch?

Alright so I did some additional disassembly under the column yesterday and have accessed the turn signal switch connector. I unplugged the battery and tested for continuity of each prong at the connector, compared to each place they terminate on the switch. (Forgive me if my terminology isn't exact).

I did all of this with the turn signal switch centered and flasher's off.

My next question is there anywhere I can find a diagram of the switch itself, with the wire colors and where they are placed. These things are faded and grimy so I can't tell if white is tan or brown etc..

I was able to get continuity at the switch for every wire. Shouldn't the white wire at the connector also show continuity to the two rear light wires...dark green and brown wasn't it?

Since I verified the brake light switch was hot to one side I assume there is a hiccup (the TS switch) channeling the voltage to the rear ground. Since the Blinkers work I know the tail light assembly is grounded.