Well I got it started! I still don't understand IGN 2, so I tied them together and added the diode lead. I tried sending IGN directly to the coil no current during start? I don't get that if that is suppose to be hot when the key is in start. I also tried just running IGN 1 to the fuse box without tying IGN 2 and it works. So IGN 2 apparently does not do anything in my aftermarket switch, maybe its not connected correct within the switch. So iam only using IGN 1 tied to the IGN feed from the fuse box, running the coil feed to POS coil and using the diode from the start side of the relay.
I know I should just let it go but I don't get why IGN 2 is not working as a 12v source during start up.
