advice on heads

magnummopar said

These heads are way more than what OP needs, his cam is only a 268...2.02 intakes and porting will actually give him LESS torque where he needs it on street RPM's. You certainly would not want to open up chambers, he needs as much comp as possible. I purposely didnt recommend Edelbrocks as he wont have enough comp to heat aluminum heads and get a good burn.

With that small of a cam, OP will get more street power with OOTB EQ than reworked stock LA, Edelbrock or worked big valve Indy/EQ's. Simply a waste of $600+.

Click to expand...

I think you need to reread what was posted, they charge to open up the chamber, they do not come that way. And I would not call it porting, blending in the 202 intake valve
To the bowl, that needs to be done after cutting it to the 202 size. It also comes in LA or Mag version, run the LA and use you existing rockers. And if the OP is running the 268 cam, stock J heads will work just fine also as well as the EQ's. i would run a different cam with a new set of close chamber heads my self. But it's easy to spend other people's $