Cam suggestions for a 360

Is it a 2bbl motor or a 4bbl motor? If it's a 4bbl motor, you might like the cam that's in it, as it's about like a 340 cam. If it's a 2bbl motor with a added 4bbl, then you could add a cam of about 220 duration at 50 and between a .450-470 lift. Will it be a headers, or manifolds? Yes, you can put it in front of the 7 1/4 rear for a bit. If it's not a posi and it spins the one legger, it won't stress the rear too bad. You will get by for a bit. And if you are using the factory 318 converter, it will stall up about 200-300 more rpm's with the 360 in front of it, but you will need a balanced flex plate.