66 273 radiator/fan shroud dimentions

snate66 said
Having had a recent success on fabrication some hard to find bits and pieces I was thinking of attempting another but bigger project.

Looking for anyone with fan shroud that came with the factory AC package in the early Valiant/ Barracuda that can get dimensions to create a detailed drawing. I believe from the collection of photos I have found that it is a two piece steel box.
My radiator has the support mounts on it and I could make a lot of "guesses" and start fabin' something but I would like to make it as close as possible.

Anyone out there have one of these boxes and the time and inclination to get all "detailed"?

It is a 2 piece box-like shroud that the upper and lower bolt together. The upper and lower each consists of 3 pieces spot welded together. There are 2 "caged" nuts per section that the special brackets bolts to on the shroud and to the radiator side panels. I had pictures but lost them all in a computer crash; I reckon I could take some more pics of one of the ones I have - but of course they're all in storage. I have 3 for the V8 and 1 for the slant (and the two are definitely different!).

I bought a small sheet metal brake and 5 of the 6 pieces are definitely doable; the remaining piece that runs across the top will take some work to get it right since originally it was done in a press. When I have some extra time, I will be making one for my custom-build 3 core 22 inch slant radiator since slant shrouds were only for the slant's 19 inch radiator.