Won't Shift Into Gear While Running

tallzag said

OK just tried AJ/FormS test. If the clutch is in about 3/4 of the way it will release, all the way it will bind on something. I freed the clutch, put it in 4th and the wheels turn freely. This mean it's not the pilot?

Again as mentioned as of right now, if I put the clutch in about 3/4 of the way the clutch free wheels, all the way and it won't move. I've adjusted it to it has 2-3 inches of play at the pedal - same thing, it just frees up a little higher. Making it with no free play and it's the same thing.

Click to expand...

Pilot sounds fine.

Man, it's hard to tell but almost sounds like the linkage geometry is off.
Once the clutch releases there isn't much more it has to do, but it sounds like the pressure plate is over traveling.

So in theory if you adjusted about 3-4 inches of freeplay it would act normal but you would just have a lot of travel before it actually came up against the throwout bearing?

If so the travel ratio on something is not right.

I would suggest that you hit Brewers up and talk to them about it.

PH: (937) 947-4416 or (937) 698-4259
FAX: (937) 947-4419
Monday-Friday 9AM-5PM