Zac_F71's 71 Demon
Made the Summit Racing order for the dyno! Came up with a plan for the dyno as well..
Got a Allstar engine cradle so I can transport the motor home safely, a few carb gaskets to try different carb spacers, and short plug wires for my 2500 Ram (5.7 hemi) which is going to get some love before going to the dyno for the 383
Plans for the dyno -
Try 4-5 different carb spacers-
1/2" 4 hole
1" open
1" super sucker are for sure
Try the 2" CPPA headers
Try a pair of old school Hedman 1 3/4" B body headers that I have
Set jetting
Set initial and total timing
No date set, as still waiting for the heads, and measure/order pushrods..
Found out Friday night that the rear end also moved 1" to the right so I need to figure that out today, borrowed a wheel from my old Mustang as well to try on to help figure out what back space Prostars to order for the drag radials.
Got the 3.73's installed, and put the center section back together. Installed in the car, set up the drive shaft loop, and installed the new speedo gear for the 3.73's.
I put the wheels back on and noticed that the left side was about 1 1/8" from the outside of the wheel opening, while the right side was only an 1/8"
EDIT! Almost forgot the pics!
My Discounted $280 shipped Nitto 275/60 Drag Radials! (cheapest they have ever been!)
Carb rebuild! Demon 750 Speed Demon carb!
Ultrasonic in bug remover LOL didn't have degreaser
ALL DONE!!
Made the Summit Racing order for the dyno! Came up with a plan for the dyno as well..
Got a Allstar engine cradle so I can transport the motor home safely, a few carb gaskets to try different carb spacers, and short plug wires for my 2500 Ram (5.7 hemi) which is going to get some love before going to the dyno for the 383
Plans for the dyno -
Try 4-5 different carb spacers-
1/2" 4 hole
1" open
1" super sucker are for sure
Try the 2" CPPA headers
Try a pair of old school Hedman 1 3/4" B body headers that I have
Set jetting
Set initial and total timing
No date set, as still waiting for the heads, and measure/order pushrods..
Found out Friday night that the rear end also moved 1" to the right so I need to figure that out today, borrowed a wheel from my old Mustang as well to try on to help figure out what back space Prostars to order for the drag radials.
Got the 3.73's installed, and put the center section back together. Installed in the car, set up the drive shaft loop, and installed the new speedo gear for the 3.73's.
I put the wheels back on and noticed that the left side was about 1 1/8" from the outside of the wheel opening, while the right side was only an 1/8"
EDIT! Almost forgot the pics!
My Discounted $280 shipped Nitto 275/60 Drag Radials! (cheapest they have ever been!)
Carb rebuild! Demon 750 Speed Demon carb!
Ultrasonic in bug remover LOL didn't have degreaser
ALL DONE!!
