Another pushrod length question.
You got 3 options:
1. Shim up the shafts to get more distance between the rocker and the lifter, not the best.
2. Get shorter pushrods, best but you still have to measure and order.
3. Pull tips out of your new pushrods, cut to length and press tips back in. They are not that hard to shorten and the tips dont need to be welded, just an interference fit.
You got 3 options:
1. Shim up the shafts to get more distance between the rocker and the lifter, not the best.
2. Get shorter pushrods, best but you still have to measure and order.
3. Pull tips out of your new pushrods, cut to length and press tips back in. They are not that hard to shorten and the tips dont need to be welded, just an interference fit.