1969 Dart Street/Strip (Re)Build
When I went back to install the transmission mount, I found my issue as to why the engine and trans wouldn't move. Previous owner welded a plate to the top of the crossmember and drilled two holes with no slop!. So I had to pull that out and fix it.
Eventually I got it back on the ground. With the 2" drop spindles, this is the highest ride height. Will be using a 12" spring with this setup.
I'll lower the rear another inch or so to level the car out.
When I went back to install the transmission mount, I found my issue as to why the engine and trans wouldn't move. Previous owner welded a plate to the top of the crossmember and drilled two holes with no slop!. So I had to pull that out and fix it.
Eventually I got it back on the ground. With the 2" drop spindles, this is the highest ride height. Will be using a 12" spring with this setup.
I'll lower the rear another inch or so to level the car out.
