vibration at 25-40 mph

I took the driveshaft in to get measured and sure enough it was bent by about 0.040" off center. The guy picked a couple of spots to heat with a torch then dump water on. After that it was a lot closer to straight. Tonight I got it back in (with the c-clips this time) and the vibration is not as bad, but still noticeable.

While I had the car running on jackstands, I noticed the wheels wobbling a little bit. Videos are linked below...are these acceptable?

Left wheel: [ame]https://youtu.be/ItKkOvtNPoc[/ame]
Right wheel: [ame]https://youtu.be/okujPya6ATo[/ame]