Snake
Mopar Nut
I need to get the 2 heater hoses for my teen 5/8 but how long,want to place them org look.Thanks,74 Duster.
Heater hose
- Thread starter Snake
- Start date
-
If your going for the original look, they will also need to have the 'Mopar' marking and the part numbers. You can order original looking heater hoses from a bunch of places online and also from your local Chrysler dealer. They should already be the correct length as it depends on if your car has A/C or not.
If your not going for the original look, buy a generic, similar diameter rubber hose and cut them to fit depending on if you want them to run along/on top the valve cover or swing by (and supported by) the passenger fender brace on the later A bodies.
If your not going for the original look, buy a generic, similar diameter rubber hose and cut them to fit depending on if you want them to run along/on top the valve cover or swing by (and supported by) the passenger fender brace on the later A bodies.
fratzog lover
Well-Known Member
Not to jack, but 68 Dart v8 hoses go over the valve cover or fender?
pishta
I know I'm right....
68 had them over the valve cover clipped together.
mguner
How many is too many?
I still have the original heater valve on my 68 and the hose bracket was off a 68 Coronet 318 but routing should be similar. Just ignore the cobbled up A/C hoses for the Denso compressor conversion. Pretty sure I allowed 3 feet per hose and had plenty to work with.
fratzog lover
Well-Known Member
Thats where they reside. Thanks Pishta. The reason I ask is that area is a little cramped and they sit next to the fuel line.
bernieca
Well-Known Member
Crappy Tire has them here in Canada. Sold as a kit, 2 4ft lengths, cut to fit. Not very expensive either.
Snake
Mopar Nut
thank you.
-
