Here is Mancini Racing MRE roller rocker, 1.6 ratio, made by Harland Sharp, but a budget version of their full roller rocker. According to a forum moderator on the dodge charger forum these rockers are good for up to 400 lb open spring pressure and hold up well. These MRE rockers do not have the needle bearing on the rocker shaft, so they are like Crane Gold rockers in that respect.
With valve closed the rocker roller tip contacted approx the center of the valve stem as shown in the photo. Roller contact then moved toward the exhaust side and started back at about .40 lift. Contact was approx centered on the valve stem at .650 lift.
Looks good to go.
