Factory primer in 67?

if you talk to 10 bodymen, you can get 7 different answers.

I have to do my own work so I ask any that will give me a few minutes. only way to learn. but you cannot use everything you are told!

you have several things to keep in mind. you take it to bare metal,.... apply epoxy primer, and let it sit long enough in the company of moisture which is always in air, O2... and you will eventually see it getting some oxidation. so is that epoxy primer really sealing???? used as sealer, it says to add reducer, as final seal......so...... ....BUT, it will stick bout anything and well/.......

polyetsrer primer is a high build sorta like shooting filler. has some great properties, you can get it too thick no doubt, seems to have good sealing properties.....

aircraft stripper, nasty stuff... takes several coats to get off all layers of paint/primer.... keep it covered with plastic so not to dry out to quick and work better....... ( have the wife do the stripper part!?).....generally. you better neutralize it ALL, best to keep it out of cracks!

when I pick up materials from the pro paint store, I always have a couple of questions I like to ask,,, I f nothin else, I get another answer to an old questin!?????

I was just on FBBO reading how this guy has to spend $10,000 for his quality paint job!!!! if I had an extra 10 grand, I danged sure would NOT spend it on paint!!!!!!!!!!!!!!! just me..