Positive camber on rear wheels after installing spring relo kit and SS springs

It doesn't say you changed shocks which is required with the ss springs , hard to tell by the photos but the passenger side should be higher than the drivers and at rest the passenger side wheel should be 1/2 inch forward of the drivers side , it's referred to as thrust angle in the books and the increased arc of tge passenger spring causes it . under launch load the spring compresses farther and the wheel mives back into line creating a straight launch.

Hey Cannucky, Thanks for the response.

I have not changed the shocks. What is recommend. Seems I missed that part.

As for the height, I took measurements before and after and my right side (passenger side) is now measured higher. There is a difference in the front clearance as well between left and right sides. I will need to check my book tonight and can quote back.