Positive camber on rear wheels after installing spring relo kit and SS springs

With the spring relocate the perches on the axle had to be moved as well. When I set my Demon up I measured from the back side of the torsion bar crossmember by dropping a plumb bob off the sockets for the t-bars. I measured not only drivers to driver rear but driver to passenger side. And the reverse the other way. I dropped the plumb bob off the rear axle flange for the rear. I got within an 1/8" from side to side. This may be an area to look into and measure. Of course the suspension needs to be weight on (jack stands under rear axle) to simulate weight on wheels.