69 Barracuda Clutch Shake Help Needed.

1969383S said

Did you soak the bushing in oil and wipe dry prior to installing it?
Is the input shaft whole and the original length?
You mention it is all original, how sure are you? Lots of 833's have been modified over the years and the shafts cut. What about BH run-out? How is the ride height and does it have original type shackles? Just guesses for you to ponder.
If you need an angle on the pinion Myself or other could surely measure ours for you.

If it is all original it would be nice to see it posted here Show "YOUR, REAL" 383/440 '67-'69 Barracudas...NO CLONES please

Click to expand...

I'm sure the transmission is original. I texted the guy I bought it form on Saturday and he said when he put the car on stands 15 years ago I did not shake like it does now. I did add some aftermarket shackles to the car to raise the rear an inch before I put the new clutch in. It did still shake with the stock shackles but it still had the old clutch in it. I guess that is something to ponder.

Angle should be somewhere between 5 and 7 degrees negative. The angle finder I ordered should be here today so I'm anxious to see what that ends up being.

The previous owner in his pics showed the car on stands. It had been that way for years and the rear stands were supporting the rear axle housing at each end it appears. Just a thought, but sitting that way straightening the springs out maybe changed the angle a bit.