Ok. We are good on A body rear. Is the measurement from the inner wheel wells the same to the tire? It looks to be as the seams on the trunk extension line up with the inner tread rib on both sides however the right bottom quarter is into the tire more than the left as your problem is described. What would be good to know is the measurement from the tire to the outside of the wheel lip on both sides. Looking down the side of the car does it look the same as far as body lines on both sides?[/QUOTE
The left side measures 1 7/16" and the right side is 15/16"
I had the tape flat against the fender lip looking straight down at the tape.
So I am 1/2" off on one side. I have elongated the location hole on the pad and moved the axle to the left 1/4", but it made the U bolts and spring leafs canted.
The reason I put it on the forum is the feed back Maybe I am too anal about this but my feeling is it should be closer than it is. I am not adverse to rolling the lip.
just came from Amarillo, did the wind farms there. Love Abeulo's, too bad about the Mopar's at the Canyon