WANTED: Dart convertible top parts needed

-

DA69RT GT

South Florida Member
FABO Gold Member
Joined
Jun 26, 2009
Messages
1,376
Reaction score
57
Location
North Palm Beach, FL
Looking for a couple parts for my convertible top.
Its the (2) metal trim pieces that attach to the top above the front windows that hold the rubber gasket in place.
Below are a few pics so you can see exactly what I need.

I would like to get both sides- as the drivers side has been cut for some reason (?) and wont hold the gasket in place (see last pic)... and the other side is twisted/bent. Worst case I could save the one side but am hoping to get 2 nice ones to replace with.

Let me know if anybody can help out and the price shipped to FL 33408.

Thanks! da69rtgt
 

Attachments

  • photo 1.jpg
    121.7 KB · Views: 457
  • photo 2.jpg
    98.9 KB · Views: 441
  • photo 5.jpg
    114.2 KB · Views: 448
Doug,
I should still have those pieces but I need to check today to be sure.
I'll get back to you late tonight.
Thanks,
Dallas
 
Doug,
I have them. I just went by the shop and took a couple of quick pics as it was getting dark. If you want them I'll take the cover off the car and get some better pics.
Dallas
 

Attachments

  • IMG_1086.JPG
    109 KB · Views: 435
  • IMG_1087.JPG
    135 KB · Views: 410
Doug,
Here's pic of them after I took them off. Look to be in nice shape.
Dallas
 

Attachments

  • IMG_1119.JPG
    93.9 KB · Views: 404
  • IMG_1120.JPG
    90.5 KB · Views: 402
  • IMG_1121.JPG
    91 KB · Views: 382
hi Dallas im looking for the oval metal pieces the hold the ram in place theres two hole and a little stud the goes into the hydrilac ram also maybe some switches
 
hi Dallas im looking for the oval metal pieces the hold the ram in place theres two hole and a little stud the goes into the hydrilac ram also maybe some switches

Sorry, I haven't been on here for a few days and I just read your reply. All the parts to the ram system are still there I believe. I'll look as soon as the weather warms up a bit. I know I sold the dash switch. It was the first part to go.
Dallas
 
hi Dallas im looking for the oval metal pieces the hold the ram in place theres two hole and a little stud the goes into the hydrilac ram also maybe some switches

Are these what you are looking for?
How does the stud attach on the other side?
Do you have to unbolt the frame assembly?
Thanks,
Dallas
 

Attachments

  • IMG_4834.jpg
    43.9 KB · Views: 251
Doug just seen this and glad you found what you needed

I still have some extra parts and 2 mostly complete top frames, one off a Dart one off a Barracuda, but believe they are the same frames

let me know if there is anything else you need
 
Wildcat, saw you might gave some (68) dart convertible frame parts. Looking for a header bow and or header seal retainer that holds the seal, where the top comes down to the windshield. Let me know if you have something left. Thanks!
 
Any chance at all you still have some of the "S" shaped retainer clips for the boot well moulding?
 
-
Back
Top