Need tuning help on 340 (Part II)
A Lunati Voodoo cam is on my list of to-do projects. Probably next years list. I suspect it would be major improvement over this low lift old design.
I know it gets redundant, but I must write this. It's like an obsession, or even a sickness. I can not over come it, so please know this is beyond my ability to control. Thank YOU.
BUY A FREAKING CUSTOM GROUND CAM. DO NOT BUY ANOTHER OFF THE SHELF CAM. THERE IS NO REASON TO DO IT. FIND A CAM GRINDER WHO YOU CAN TALK TO, NOT SOME SNOT NOSED PUNK ON THE PHONE MAKING CHUMP CHANGE. SOMEONE WHO GETS CAM DESIGN AND FUNCTION. OFF THE SHELF CAMS ARE JUST THAT. MADE FOR THE MASSES.
Sorry for yelling. It is such a simple thing, takes very little time, and ALL, EVERY SINGLE ONE of th cam guys I use WANT you to CALL them and discuss YOUR issues with them. They can grind something to correct your disfuctioning parts you have. I have listed them elsewhere before, but I do so know, in the hopes that if just one guys reads this, and gets a better part, and makes HIS hotrodding experience better then I'm all good with it. Just one guy.
Racer Brown cams. Jim Dowell. Call AFTER 5 PM ET
Cam Motion cams. I talk to Denny.
Mike Jones cams. You talk to Mike when you call.
Straub cams. Chris Straub.
All of these guys will hook you up with a much better part. You'd be surprised what couple of degrees here or there will do, or getting a bit more area under the curved, or correcting Lobe Center Angle and getting the cam installed on the correct Intake Center Line.
It all adds up to a better experience, less trial and error and less MONEY spent.
Sorry for the repititious ranting.