SS/B Barracuda project

Hello there. Looks like your having a good time there. Things that you might want to look at before you go much further. I too built a Hemi Dart and these are the things that I did and it helped out a bunch.

Headers, TTI has a real nice set of headers for these cars. I believe these set the engine 1" to the passengers side....not 1.20. I urge you to look at there we'd sit to check this for sure. Nobody but TTI makes a quality set of headers for these cars and it will save you thousands of dollars buying these headers and setting the engine in a location to ocomindate them instead of having a custom set built.

Steering column. The bottom tube of the steering column needs to be trimmed down to clear the corner of the cylinder head. This is what the factory did and I had to do the same thing. Easy to do.....pull the plastic bearing out, trim off 1.500, file smooth, drill new holes for the plastic bearing and reinstall.

Hope this helps, Troy