Sure! Did you see the window frame pictures o posted in this thread?
If not let me know and I'll repost them.
If you look at the frame just below the vent window you'll see a notched bracket. when the frame is installed int the door the notch bracke slides into the pinch area you see in the photos I previously posted.
I've attached s photo of the pinch block and bolt. The square block goes on the outside of the pinch area and the screw passes through the the pinch area and the notch on the vent window into the block. There is a littl hole in the door that usually has a plug in it. Remove the plug and pass the Allen key through the hole into Th screw. Then tighten the screw into the block basically pinching the whole assembly together like a sandwhich
View attachment 1714937316
