Manual Steering Box Rebuild Questions

from the spec sheet that looks OK and maybe very good for this. Just make sure you only mix it with greases that are compatible with that Lithium-Calcium base. Also the high temperature is a bit on the low side, but should be fine unless there are headers real close to the box. Even then, it might be OK. Only way to know is measure the temperature after a hard run and to check for oil seperation.

Mr Dart said
I tried to find that John Deere JDM J 25C or JDM J13E4 grease here but couldn´t find it anywhere. Instead I found SKF LGEV2 grease which is especially ment for: "Extremely suitable for lubricating large sized spherical roller bearings subject to high loads and slow rotations, a situation where microslip is likely to occur. Extremely mechanically stable providing good water resistance and corrosion protection." And this grease is easy to reach allmost in any store in this sector.
Click to expand...