Stalls in Gear, Automatic- Restarts Good- Can Slam it into Gear! EEEK

Darthomas said

No ridges in tips of the idle mixture screws?
Fuel should never be dripping out of the venturis at idle, but should flow immediately when cracking open the throttle.
If anything, I'd suggest trying the float level lower, that would be a larger gap when measuring the floats.

Click to expand...

What do you mean about ridges? It goes to a point, taper, it's clean, not worn, not mushroomed at the tip.
Before I changed the timing if I had the mixture low enough it wouldn't drip and the engine would run smoothe. I think with the idle all the way out its probably opening the throttle right.
I can try to readjust the floats. U really think that could prevent the fuel from dripping in? Have u tried it before and been successful? So, lower the level, larger gap so be sure with you I will measure now more than 1/4? There seems to be some confusion from what I've read about float adjustment and well, I'm a confused one.
Thank you for helping me.