help I need this

I had no problem going to the local NAPA store and getting a '67 Dodge Coronet dual reservoir MC with equal reservoirs for a drum/drum system. The cap was different, and bolts down in the middle, rather than having a bail wire over the top, but it was an equal hole MC. PN IIRC was NMC M1874M. Supposedly 1" bore. The pix shows the bail wire but the actual one had the bolt-on cover..... which does not change the function.

http://www.napaonline.com/napa/en/p/NMAM1874M/NMAM1874M_0498087014

And yeah the reservoirs are slightly unequal, but not so it will matter on a drum/drum car. The rear reservoir is slightly bigger, and feeds the front, but that is as it should be since the front wheel cylinders are always bigger on these cars.

Is the issue the equal reservoirs or the bail wire top and the look of the 2 rounds caps on the lid? If you don't care, then this should be EASY to get. $37.35 from NAPA in my neck of the woods....