Need Front Disc Brake Help
Well, guess your not familiar with working on pin type caliper disc brake systems.
Put the pads between the rotor.
Wiggle the caliper on top of the rotor and pads.
Put one of the pins all the way through one side of the caliper and pads.
It's a good idea to use some type of slippery lubricant on the rubbers in the caliper, and ends of the pins to aid in the installation.
Install the "spring" onto the pin, and the face of the caliper.
Go to the next pin, and install that pin while holding the spring in place to get the pin through the mounting hole in the front pad.
First time, takes getting used to, but use your noodle, and you can figure it out.
Well, guess your not familiar with working on pin type caliper disc brake systems.
Put the pads between the rotor.
Wiggle the caliper on top of the rotor and pads.
Put one of the pins all the way through one side of the caliper and pads.
It's a good idea to use some type of slippery lubricant on the rubbers in the caliper, and ends of the pins to aid in the installation.
Install the "spring" onto the pin, and the face of the caliper.
Go to the next pin, and install that pin while holding the spring in place to get the pin through the mounting hole in the front pad.
First time, takes getting used to, but use your noodle, and you can figure it out.