what line go's where?

Just to make sure I bench bled the master cylinder and no air, so that's good. Then I tried pinching the rear brake hose, it made no difference to the peddle. So I removed it and pinched the driver side brake hose, again on change. This time I left that hose pinched and pinched the passenger side brake hose, still no different. No peddle pressure with out several times pumping the peddle. One thing I noticed is that after pumping up the peddle and after letting off, the master cylinder was hissing from the cap and some not a lot of fluid was seeping out under caps. One thing I didn't do is plug both hole in master cylinder and check peddle pressure just to make sure nothing was wrong there. ??