Finally revamped my entire fuel system.

Still need to clean the wiring up a bit in the trunk.
Also need to make some matching vent lines and fuel feed line from regulator to carb.

I bored some holes through the crossmember areas underneath and installed
Grommets to cleanly run the fuel hoses through.
I ran them through the inner fender area in the wheel well and they pop through holes I cut in the fender for the regulator all in an effort to avoid heat from those pesky headers.
Very happy with the set up and the whisper quiet pump.
I can get more pics if anyone interested.

The reason I did this is because I was not running a return regulator and kept burning out already noisy stand alone electric pumps.
Once I burned out my Holley HP-150 I had enough of my Mickey Mouse fuel system.