400 budget compression HELP +++++

I have a rebuilt 400 that is stock with 30 overbore flat top pistons and trying to find the least expensive way to get a little more compression for now with better quench due to the possibility of doing a stroker sometime in the future not wanting to deck the block etc I have a set of heads that have been ported etc and they are at a shop getting checked for cc etc I'm looking at the KB240 pistons looks like they would raise the CH by .095 (1.813 to 1.908) putting the piston down in the hole around .025 + compared to around .125 now any opinions would be a great help I may be way off base on this