72 Chrysler engine harness

67Dart273 said

The two small spade connectors on the start relay are the coil. One goes to the "start" signal coming from the key (usually yellow) and the other (G) goes down over the top of the transmission (3 wires normally) and connects to the neutral / reverse switch on the transmission

Click to expand...

That`s what I expected, and what is shown in the moparts schematic. I`m using a older 4 speed and would like to delete the neutral safty part of the equation, NOW nobody start dogging me about this feature, I know how to wiggle the shifter in neutral before starting.
Del, how / what needs ro be done to make it start without the nss?
Thanks