68 Barracuda........ Temp and Gas Gauge Issue.

The 12V feed to the fuel gauge had already been cut by the previous owner to feed his VR. The 12V feed that normally would go to the pin feeding the gas gauge 12V now feeds directly to the RTE VR. There is no voltage fed to the fuel gauge other than the 5V coming from the RTE VR to the shared circuit. I put the tape on just as insurance because I wasn't sure about backfeeding into the VR from the 5V side. I really don't want to pull apart the fuel gauge if I don't have to.

Thanks for the comments.

Allan