Peyote's 3D Printed Dash Updates
Turn signal arrows are a good idea...how are you going to light them? Will they just be holes, or will they be holes with a piece of colored translucent plastic behind them?
dang yours is looking good.
they will be arrow shaped cutouts with a green plastic lens or green led in it. I'm not sure which would be better at this time, I'm leaning towards pouring green tinted acrylic plastic into the arrow shaped cutouts and embedding green leds into the plastic. This project is #7 on my list of todo's.
I have a :
1. molded kick panel with speakers in it that I have to remold for my vacu-form (63-66 a bodies slimline versions are available to be made now) but I'm looking into5.25 round 2.5 " deep with the option to cut a hole in and fit the 2" mini speaker also or a 4"x6" speaker kick panel to match the rear convertible side panel I plan on making also #8.
2. a dash pad for my 66 dart I want to make for production (vinyl that is thermo-formable is on order) and base metal parts are changing into molded .125 ABS. (63-66 darts first then 63-66 plymouth last)
3. rear arm rest pads for my 66 convertible. (started the main master part with no ashtray)
4. top trim for the above rear side panels. molds almost perfect now just figuring how to cut it out using a jig.
5. front (the rear set) of splash shields made from ABS so they don't rust again.
6. top wing vent divider cushions for the convertible and hard top( convertible molds are made and waiting on approval of the wife for cosmetic's)
and then
7. the complete Dash board bezel setup for the 66 dart, that includes the instrument cluster ,radio bezel and glove box door plus end pieces for the GT
series cars. oh and learn how to spray chrome in the process.
8. main rear sidepanels for the 63-66 convertibles (just add your trim and carpet) with a 4"x6" speaker molded into the front down leg of the part.
so as you can see it's pretty far down the list.
