Well CRAP, should have left it alone.
Water wetter? Why are you using a band aid?
I wanted to give the cooling system a good cleaning because since putting the Magnum in I have been seeing little chunks and flakes of crap in the coolant.
I found out that it is sealer of some sort probably from when the engine had the OEM cracked heads on it.
I put EQ's on it when I put it together, but apparently the sealer had coated the inside of the block and was coming loose here and there causing **** in the coolant.
First I drained all the antifreeze and filled with plain water and ran it to temp, and dumped it 3 times.
Then refilled it with water and dishwasher detergent and ran it for a bit to remove any oils from the metals.
Then after that I dumped that and rinsed with 3 refills and drains.
1 gallon of white vinegar and water run to full temp and then left to sit over night, then drained and rinsed after a quick warm up run in the morning.
ALL kinds of crap came loose that time and kind of floated it out and when I was rinsing it off the radiator and fan I got the controller all wet causing it to stick in the on position.
I put the Water Wetter in it for lube and anti corrosion purposes, because I knew darn well I was going to be flushing it all again, and didn't want just plain water in it until I did.
It wasn't because of a heat issue.
