Shifter... What did I buy?!

The shifter levers in those pictures fit a Munce with the thru bolt shift shafts for attaching the levers. The little hole on the reverse lever that is bolted to where the shifter is suppose to be bolted is for the factory Muncie back up lights linkage to the switch which would be bolted to the side cover. The levers also fit Saginaws, 3 or 4 speed. If you use them on a MOPAR trans they will slop up and down eventually, no matter how tight you get the nut, causing your linkage adjustment to take a dump.

Russ.