My SB build...

Make yourself do it as in make the purchase? Move to a heavier older set up? Or tune it?

If your interested in a TQ intake and carb, let me know. At least hood clearance will not be an issue. And you can look stock and still run like stink. A tuning kit is not available. This makes it hard to use them.

A roller cam is really only over kill in price but the performance of the roller has the valves opening up and staying open longer. On your application, it would buy more torque. At near triple the price of a Hyd. cam, it is really not worth it IMO.

Cam specs can be found at the manufactures sites.

I myself am using the next size up from the Lunati cam. A Hyd. roller comp cam.
XE 274HR-10, 224 - 230 @.050 / .538-.534-110. The compression ratio is 9.3-1 w/Edelbrock heads for 87 swil.
TTI for exhaust. Weiand Stealth intake.

The move to roller rockers @ 1.6 buys back the lost lift from the bad angles of the pushrods and the horrible "Actual ratio" of the stock rockers.