Minivan Ghost window

OK, so the regulator showed up, went in fairly easily (compared to other stuff) and worked right off the bat. Had one snag: the auto "up" function didnt work. Your supposed to pull the switch up past a detent and the window is supposed to go up all the way automatically. This wouldnt do it and I could not understand why as that was a motor function, not a regulator. After trying it a few times, I lubed the rubber gasket up the sides of the window frame and sure enough the auto function came back. Seems like the gasket was providing enough friction to trip the relay or whatever stops the motor when it feels its all the way up? The hardest part by far was getting the window off the 2 nylon carriers. You are afraid your going to break the window, and pushing the window down into these snap clips seems like its going to be bad for the regulator but I bet on the line they slam these home with no ill effects. The driver window seems to peek up out of the felt about 1/8 inch more that the OEM passenger side when its fully lowered but Im OK with a functional window. Also the panel button clips they sell on Amazon that say they fit Chrysler...dont. They are too small in diameter and the wrong design. Oh well, I spaced the good ones out and snapped it right back on. Job done for less than $60 and about 2 hours.