Boingk's Budget 318 Build
...but before the parts go in, the heads are getting ported.
This is the intake for the #3 cylinder, you can compare it to the unported one next to it which is a mirror image. I'm only doing very basic stuff like port-matching to the intake I have and removing any protrusions like the bumps you can see on the lower part of the port on the left. It should help this basic, budget rebuild breathe a bit easier.
![](https://lh3.googleusercontent.com/JWSnuoKziqDFtzllie0yLJTkuNAiwbEmLZHvzaPsXtiAqRKb8YywUv3dF7Sib_nxrvbzloSt8oACvA=w1280-h1024-no)