Fan shroud questions.
Ok, got both mounting strips fabbed up. I ran em thru the bead blaster at work to rough em up for primer, and to rough up the mating surface for some JB weld epoxy. I taped off the mating surfaces, epoxy primered, and did a final test fit of these pieces. Tonight i plan on fitting the shroud to the radiator, and centering everything up. With it squared up and clamped in place i will use a sharp pick and scribe through the mounting holes on the radiator flange to transfer to the flanges i made. I also plan on bending the long ends of the flanges i made to 90° to stiffen them up. I made them a little longer than the radiators mating flange so i could do this. Heres current pix.
Ok, got both mounting strips fabbed up. I ran em thru the bead blaster at work to rough em up for primer, and to rough up the mating surface for some JB weld epoxy. I taped off the mating surfaces, epoxy primered, and did a final test fit of these pieces. Tonight i plan on fitting the shroud to the radiator, and centering everything up. With it squared up and clamped in place i will use a sharp pick and scribe through the mounting holes on the radiator flange to transfer to the flanges i made. I also plan on bending the long ends of the flanges i made to 90° to stiffen them up. I made them a little longer than the radiators mating flange so i could do this. Heres current pix.
