Yep,another 67 Valiant resto/mod for me this time :)

I picked up a 91 roller cammed 360 with 70,000 miles on it in a church van at the u pull it. It only took me 3 days,300 miles of driving and some searious creativity to get it out by myself. This motor is super clean inside and out and even came with a windage tray. The guy at the yard felt sorry for me having to go through all of that just to get an engine and just charged me for the block lol. It has 308 heads and barely any ridge in the cylinders. The other u pull it had a 79 Cordoba in it with a 360 so I robbed the mounts. I needed a car pan and found one (Milodon) from a fellow member but had to order a pick up. I took the pan off of the motor and see that it has a reusable gasket,score. The valve covers also had reusable gaskets. I took a sawsall to the pick up and removed it and dropped the windage tray before putting the pan back on. I am installing a new pump when the pick up goes on and the pan gets here. I threw the 308 heads back on it for now.