First A-833 rebuild, what to look for?
You pretty much summed it up, obviously replace all the bearings and seals, it's a good idea to replace all the brass, and while i'm in there I almost always replace the shift strut key's, and springs. Also check the end play on the cluster gear, alot of guy's overlook this, just make sure there isn't excessive play in it, Brewers has shim kit's for this if you need them. Call the Brewers and get there rebuild kit, it's around $100 and has all the bearing's seals, and snap ring's . Just take your time and make sure everything is really clean! Here is a diagram I use to help with thing's, good luck!
Jeff
You pretty much summed it up, obviously replace all the bearings and seals, it's a good idea to replace all the brass, and while i'm in there I almost always replace the shift strut key's, and springs. Also check the end play on the cluster gear, alot of guy's overlook this, just make sure there isn't excessive play in it, Brewers has shim kit's for this if you need them. Call the Brewers and get there rebuild kit, it's around $100 and has all the bearing's seals, and snap ring's . Just take your time and make sure everything is really clean! Here is a diagram I use to help with thing's, good luck!
Jeff