After my vacation I'll be back into parts making mode
next step. pouring the bottom filler section so that I can make these things!
the rubber for the bottom section is harder (shore 40 instead of 30 for the deep blue top) that way it'll deform less and hold the plugs when I add the expansion foam since the last test on another part proved to me that 30 is too soft to be "grippy" on the filler plugs.
almost put too much in the bucket when I degassed it (whew) it makes a mess if you do. almost a 6 to 1 expansion on this stuff!
poured and waiting on curing (24 hours) then I get to see if I did it right.
next step. pouring the bottom filler section so that I can make these things!
the rubber for the bottom section is harder (shore 40 instead of 30 for the deep blue top) that way it'll deform less and hold the plugs when I add the expansion foam since the last test on another part proved to me that 30 is too soft to be "grippy" on the filler plugs.
almost put too much in the bucket when I degassed it (whew) it makes a mess if you do. almost a 6 to 1 expansion on this stuff!
poured and waiting on curing (24 hours) then I get to see if I did it right.