'Wheely Cool' Mopar shop shelving you can make yourself.

-
Alaskan_TA

Alaskan_TA

Well-Known Member
Joined
Nov 12, 2004
Messages
6,415
Reaction score
5,289
Location
PA
'Wheelly Cool' Mopar shop shelving you can make yourself.

I used;

8 - 14" wheels.

6 - wheel covers & 2 hubcaps.

A few assorted used emblems.

4 - 2x6x10's ripped to fit inside the inner wheel beads.

4 - 2x8x10's tops for shelves.

2 1/2" screws & construction adhesive to laminate each shelf together.

1/2" Ready rod, nuts & washers to secure each wheel to the cinder block wall.

(interior wall in my case, so I left the ready rod long so I can duplicate these on the far side as I get more wheels & caps / covers)

mopar shelves.JPG
 
Last edited:
Very cool! Overbuilt probably unless you are planning to store engine blocks on it! But still very cool!
C
 
That is a great idea. The coolness factor is over the top.
 
Mrmopartech said:
Only problem I see is that when the shelves are full,the damm thing rolls away,mrmopartech
Click to expand...

1/2" Ready rod, nuts & washers to secure each wheel to the cinder block wall.
Click to expand...

They are through bolted with nuts for the wheels & on the far side of the cinder block wall so they are not going anywhere.

I left the all-thread sticking out far enough on the other side to repeat the process when time allows it.
 
You must log in or register to reply here.
-

Back
Top