Where is that Ignition Bezel Tool?

-
gdizzle

gdizzle

Well-Known Member
Joined
May 25, 2015
Messages
954
Reaction score
56
Location
los angeles
on my 66 dart, after having to remove the dash unit a few times, getting that ignition bezel on tight is near impossible for me. And it gets loose after a few days. It is the 4 notch type. Tried a search on eBay but I cant tell which tool is the one I need. Anyone have a link? thanks in advance.
p.s. I already bought the wiper/headlight bezel remover tool.
 
I made one from a piece of pipe with the same O.D. as the bezel nut. Just square up the end of the pipe and place it on the face of the bezel nut and scribe lines where the tangs need to be and use a die grinder to cut out the material between the tangs.
 
Thanks, that link looks like the tool for the Wiper/headlight bezel which I already have.
I think there is another one that is larger?
 
I used a pair of snap ring pliers with interchangeable heads so I could find a pair that fit snug to take the bezel off.
 
I used a gasket scraper. Sort of like a large screw driver. It fit almost perfect, to remove the ignition switch, in My 65 Valiant.
 
I just use circlip pliers, internal or external depending what you are doing. The heater control nuts use something similar but smaller, hence the circlip pliers are the Universal Mopar Switch Tool.
 
You must log in or register to reply here.
-

Back
Top