'76 Dart Lite -- Budget Boost Build

I pulled the carb and studs. The supercharger appears that it will clear the dipstick nicely. I might have to do a a little trimming of the choke well on the exhaust manifold, and make a small extension for the bolt and nut that protrude through the intake manifold from the exhaust. I will need to build an extension to the front of the supercharger for the belt drive. I used a piece of wood as my template, and measured and mocked up what will bolt to the intake, and act as the base for the supercharger itself. I need to pick up some metal, and build the adapter. Once that is set up and ready, I will build a stand that uses the motor mount to the bottom of the super charger, as a support for the additional weight and leverage that will be hanging off the side of the engine.