Electric water pump
rocodart" do u have the flow figures on that pump ur running ? how`s it do when it`s a 100 out side ?
It could be 120 out it wouldn't matter. It is paired with a Be Cool radiator and twin fans.
Information about your
Water Pump
Q: Do you recommend the use of CSR Water Pumps for street use?
A: Yes, a large percentage of pumps are sold to street users.
Q: How do I wire my water pump and what size wire is recommended?
A:We recommend that the water pump be wired and fused separately. A #12 gauge wire minimum with a 15-amp fuse minimum. An adequate chassis ground is required Blue wire, positive, 12v, black wire is ground. Do not ground to anodized or powder coated surfaces.
Q: What is involved in installing a CSR Water Pump on a late model with a serpentine belt system?
A: Most of these applications are a direct bolt on utilizing a shorter belt.
Q: I have installed a CSR Water Pump and I can hear the motor running but it is not circulating water. What could be the cause?
A: Check for air somewhere in the system. Fill the system from the highest point such as the intake manifold or the radiator hose while the pump is running.
Q: What is the life expectancy of the electric motor?
A: The motor should be replaced at 3500 hours or 50,000 miles of everyday use.
Do not run water pump on a closed thermostat. A restriction ring must be used.
To move wire to any position: Water pump motor can be rotated by removing the 4 black bolts on the top of the motor, brush plate and magnet ring must be rotated together.
We no longer have parts for any of the old 3 bladed impeller style water pumps.
A water pump with serial number starting with a letter is our new style pump requires a hose adapter fitting with a 1-1/16-20 FIP . The pump with all numbers for serial numbers will have 3/4" FIP hose adapter fitting.
