[Found!] 1969 dart tail light bezel screws

-
Status
Not open for further replies.
kybatman

kybatman

The Original Bruce Wayne!
FABO Gold Member
Joined
Aug 23, 2014
Messages
587
Reaction score
223
Location
Bowie, Texas
Rating - 100%
6   0   0
Contact seller
Does anyone have a good source for the small screws that attach the bezel to the bucket?

Mine we mismatched back in the 70's I think.

Thanks,
Bruce
 
I tried to find some with no luck. I had the hardware vendor where I work look for some and they found a place that would make them but I didn't want to buy 1000 for the few I needed. I know they have a smaller counter sunk head for the thread size they are. #8 with a #6 sized head comes to mind. What I did was helicoil my buckets and use the smaller screw. PM me if you can't source and I'll get you exact details of what I did.
 
I bought new bezels and lenses. They came with screws but aren't the right size. Ridiculous! Did you try looking on R/T Specialties website?
 
I just retapped to little bigger fine thread and found tapered black headed phillips screws
at a decent size hardware store, turned out fine.
 
awesome suggestions..

not sure what direction i will go yet..

I found the bezels at a good price, so will keep looking..

Thanks,
Bruce
 
kybatman said:
awesome suggestions..

not sure what direction i will go yet..

I found the bezels at a good price, so will keep looking..

Thanks,
Bruce
Click to expand...
I have some used ones, maybe enough for both sides.
I will look when I go to my shop tomorrow.
Let me know if you still need them.
Ed
 
If kybatman is all set, if anyone has just one to spare - I need just one! I have 7 originals, and one empty. I have tried my inventory, as well as local hardware stores, and cannot find one that is even close.
Thanks,
Richard
 
3rdLM23P9 said:
If kybatman is all set, if anyone has just one to spare - I need just one! I have 7 originals, and one empty. I have tried my inventory, as well as local hardware stores, and cannot find one that is even close.
Thanks,
Richard
Click to expand...
These are the ones I have. I may have one or two extra.
Ed

HPIM2539_zpstxo10mpf.jpg


HPIM2540_zpsw2shthuq.jpg
 
Ed,

Send me payment instructions and I will get it sent.

Thanks so much.

Bruce
 
3rdLM23P9 said:
If kybatman is all set, if anyone has just one to spare - I need just one! I have 7 originals, and one empty. I have tried my inventory, as well as local hardware stores, and cannot find one that is even close.
Thanks,
Richard
Click to expand...
I sent the ones to Bruce.
I still have 2 spares.
Ed
 
Status
Not open for further replies.
-

Back
Top