Disc brake conversion question

Disc brakes would have a different master cylinder and proportion valve but... Those might very well be junk in yard and best left there.
I have done this disc brake pull without air tools twice over the years. 1 of those cars was upside down and as it turned out was the easier of the 2.
I always plan to remove the upper arms at eccentrics and lower arms with pivot shafts. I got lucky both times. The ball joint splitter, diagonal plier, fighting dang cotter pins, etc.., not req'd ( other that at tie rod ends ).
Years later, when I had to burn the upper eccentrics out of the 67 vert with a torch, I was glad all those parts needed were here.