[FOR SALE] 1971 340

-
Status
Not open for further replies.
F

Fenix13

Active Member
Joined
Aug 23, 2012
Messages
32
Reaction score
0
Location
Ventura, CA
Rating - 0%
0   0   0
Contact seller
I have a rebuilt 340 that I picked up from a member about 3-4 years ago for my Barracuda build. Located in Moorpark CA

Keith Black Performance Pistons - KB243-040 Hypereutectic

Mopar Perf. ''Purple Shaft'' Hydraulic Camshaft Kit:Camshaft, Hydraulic Flat Tappet, Advertised Duration 268/272, Lift .450/.455

Still in box: Holley fuel pump, Mopar PerformanceValve covers, Edelbrock RPM Performer intake manifold, ARB bolt set.

Also have a Summit Racing 850 CFM carb to go with it, and Schumacker 318 conversion motor mountsinstalled on it.

Never got to installing the engine, asking $1500 for everything.

20160224_165908.jpg


20130327_133016.jpg


20130327_163335.jpg
 
Fenix13 said:
I have a rebuilt 340 that I picked up from a member about 3-4 years ago for my Barracuda build. Located in Moorpark CA

Keith Black Performance Pistons - KB243-040 Hypereutectic

Mopar Perf. ''Purple Shaft'' Hydraulic Camshaft Kit:Camshaft, Hydraulic Flat Tappet, Advertised Duration 268/272, Lift .450/.455

Still in box: Holley fuel pump, Mopar PerformanceValve covers, Edelbrock RPM Performer intake manifold, ARB bolt set.

Also have a Summit Racing 850 CFM carb to go with it, and Schumacker 318 conversion motor mountsinstalled on it.

Never got to installing the engine, asking $1500 for everything.

View attachment 1714991646

View attachment 1714991647

View attachment 1714991648
Click to expand...
P
Fenix13 said:
I have a rebuilt 340 that I picked up from a member about 3-4 years ago for my Barracuda build. Located in Moorpark CA

Keith Black Performance Pistons - KB243-040 Hypereutectic

Mopar Perf. ''Purple Shaft'' Hydraulic Camshaft Kit:Camshaft, Hydraulic Flat Tappet, Advertised Duration 268/272, Lift .450/.455

Still in box: Holley fuel pump, Mopar PerformanceValve covers, Edelbrock RPM Performer intake manifold, ARB bolt set.

Also have a Summit Racing 850 CFM carb to go with it, and Schumacker 318 conversion motor mountsinstalled on it.

Never got to installing the engine, asking $1500 for everything.

View attachment 1714991646

View attachment 1714991647

View attachment 1714991648
Click to expand...


Pm sent
 
Curious on what the VIN# is? My car I am getting restored was built in California and would like to find my original 340 for the car.
 
Date on the block is 6/14/71.

The pad on the passenger side has Paint on it, but it didn't seem to have a vin stamp. I'll check again but don't want to mess with removing the paint.

20160224_165712.jpg
 
My 72 Demon came from that area and was built in 8/71. Would be interested in VIN also
 
Fenix13 said:
Date on the block is 6/14/71.

The pad on the passenger side has Paint on it, but it didn't seem to have a vin stamp. I'll check again but don't want to mess with removing the paint.

View attachment 1714991757
Click to expand...

My Demon was built in October 1970 so chances are it's not the matching engine for my car.
 
Interested, next in line if the previous couple guys drop out. No need to clog your inbox up just yet though. Let me know if the ones above don't move on it.
 
i'll put my money back in my pocket , great deal for you xlurkxdogx , just built one , sent thousand$$$$$ .
 
Status
Not open for further replies.
-

Back
Top