new old build 68 valiant

hey everyone looking for some advice on car i have had for long time sense High school. body is a clean 68 valiant 100 rust free the car has been sitting in storage for 10 years has not been on the road in 18. I am looking for a good weekend cruiser. Something i can put my young children in ad go for cruise I don't have a huge budget and the car needs a lot of work. The body is stripped as of now last time on the road it wasnt streetable or handle well. I still have some parts but i am looking for build advice to meet my goals. 1 Daily driver, 2 stops good, 3 corners well, 4 hook decent. again I am on a budget not broke but lets say 5k for the build. Parts I have 489 a body 8 3/4 323 sure-grip lbp good usable condition 10 brakes. I have few k frames sb 67 sb 71 or 73 spool stock upper rebuilt large ball joint arms i also have set of firm feel uppers control arms i had on the the car 10 years ago. I have complete stock 71 suspension i picked up that was rebuilt i have both the 71 brakes or i have a set of 11.75 rotors with wilwood calipers. I also have a set of firm feel adjustable strut rods. I have few sets of torsion bars laying around. i dont remember what all they are but i know i have stock 340 bars and /6 bars and big set of mp performance bars. The only sway bar i have is a old pst 1 1/8 i pulled it off long ago it fit like crap did not use factory mounts and the tabs that bolted to the lca broke. in short i need a sway bar. i have few sets of rear springs /6, stock 340 and a set mp circle track springs ? I installed relocation kit "when i was 16 " It should be redone should i re do it or just repair the rails and install offset shackles ? I have a rear sway bar kit afco? not sure the brand. I do need a new trunk pan again i cut it up for fuel cell. If i replace the pan should i mini tub it? Would i be better off with a suspension kit if so what brand recommendation. Once this is back together i will probably sell off the misc parts to help recoup some cash As far as power plant i have decent 340 needs leaks fixed but has good compression and i have all parts for 833 4 speed swap. body has subframe connectors Recommendations on suspension?