UCA BUSHING REMOVAL/BALL JOINT BOOT QUESTION

A word of advice about using K7103's - I had to really wail on those UCA cam nuts to get the cams to stay in place. Because of the extreme angles you can put the control arm in if you use those bushings they may have a tendency to move unless the nuts are 100% good and real tight. I have stripped out a few nuts as well trying to get them tight. Best to use new hardware if you can for the cams and nuts. I have come across some cam nuts that are longer than stock and those would give more threads to hold onto the alignment bolt, but I can't remember which company made them. They were like 3/4" - 7/8" long.